Comments on: Hookah How To: Fitting a Heba Diffuser on a Rotating Hookah

By: Ross

Ross — Tue, 27 Nov 2012 04:59:22 +0000

It fits easily even without cutting it, the hard part is removing the hub from the top of the glass. I was alone when I did it so it was even more difficult, but finally got it off by holding the hub with my legs and twisting the glass with my hands, this also helped to avoid putting any pressure on the hose connectors – which I took off anyway along with the stem and stand.

By: Ruth

Ruth — Thu, 13 May 2010 02:33:30 +0000

I was able to fit the clear rubber fitting of the small diffuser over the downstem of my Old School Rotator Hookah using this method, but the stem is too long to allow the diffuser to fit into the glass chamber–the stem no longer screws onto the hookah, or it didn’t until I took the diffuser off again. Fortunately the glass chamber is large enough that I should still be able to have enough water in it to get a good filter, but it seems silly to include the diffuser with this hookah if it doesn’t work with it.

By: tim from boston

tim from boston — Tue, 07 Jul 2009 22:17:39 +0000

Even easier, without cutting is to run the rubber part under HOT water for a few minutes, then it becomes playable enough to slip it over the end, even on big KM stems